TBS MR STEELE 2345KV SILK

Power, but not at the expense of your battery. Torque, but without sacrifice to smoothness. Hand wound, because we’re proud of our trade. White, to show off how unique this motor is. The Mr.Steele motor by TBS!

With the TBS Mr.Steele motor, a trend in motor manufacturing is finally broken. No longer do you have to sacrifice batteries to squeeze just a tiny bit more power out of your setup. We also stopped using top-of-the-line magnets or chasing weight requirement pipe dreams to sacrifice reliability and smoothness in flight.

We made a motor to match the flying style and requirements of one of the most popular miniquad FPV pilots, and RotorRiot host, Mr.Steele! It’s a motor built for longevity, consistency and silky smooth feel.

A BIT OF HISTORY …

We started out with a couple of corner-stones in motor properties. High kV, low kV. Big stator, small stator. Varying stator laminations, winding techniques and copper diameters. We analyzed the results on a thrust test stand next to all reputable motors, and matched them to the requirements of Mr.Steele’s reference motors. We found the closest match to his requirements, and produced 2 different styles to send for Mr.Steele for testing. After running each of them for a few days, we received feedback, made corrections on the motor, and re-made samples. After a total of 5 iterations and over 100 motors sent, we finally managed to isolate the perfect candidate. But the quest was not done! Next we worked on the finish. To produce a white motor, all tolerances were re-calculated. Each and every detail of the motor, down to the C-clip, was investigated, refined and tested. After almost 4 months of ups and downs, today we are able to release and stand behind what we believe is a motor that will cause a paradigm shift for this industry.

TECHNICAL SPECIFICATIONS:

• Stator size: 2306
• kV rating: 2345kV
• Weight: 28.5g
• Color: white
• Windings: by hand
• Awesomness factor: over 9000
• Stator lamination: None of your business

INCLUDES

• 1x TBS Mr Steele 2345kv motor
• 4x Mounting screws M3x6.5
• 1x Aluminum Low-Profile Prop nut