FVT LittleBee 30amp ESC
The FVT LittleBee 30amp ESC is using Silabs processor and fast dedicated driver chips, providing excellent freewheeling and exceptional braking capabilities.
We’re only using the best components available, period. And, as we build these in our own factory, our experienced staff ensures you’re getting the best of the best!
We know that with mini quads, every gram counts. LittleBee 30A is 35x17mm and weights 11g. Your multirotors can be smaller and lighter than ever before
To unleash it’s full potential, LittleBee has been designed to run BLHELI firmware. Factory flashed with BLHELI 14, it’s ready for action!
Oneshot125 is a different and faster communication protocol between the flight controller and the ESC on your quadcopter. It allows the FC to send control commands to the motor quicker, therefore in theory your multirotor should perform better.
Original vs. Fake
As with any other popular product on the market, we have been notified of cloned LittleBee ESC’s sold by various websites. These are of poor quality and do not provide the same performance as the original product.
You can easily spot the fakes, as they come with matte pcb finish, whereas original LittleBee ESC has a nice and smooth glossy finish
Original vs. Fake
Additionally, cloned esc’s seem to have a very rough PCB edge, while original LittleBee ESC has a
very good qualty finish and smooth edges.
Cells: 2S to 6S
Voltage: 7.4V to 25.2V
BEC type: no
Cutoff Voltage : off/3.0v/3.1v/3.2v/3.3v/3.4v
Size: 35mm x 17mm x 6mm
Programming card: YES USB linker
Water cool: no
NOTE: These are OPTO esc’s meaning they will not have a 5v output. you will need a 5v UBEC to power up the Flight Controller instead.
5V UBEC ESC’s:
BlHeli Suite Software: